KO PROPO MC-8 2.4GHz TR set (w/MR-8)

KO PROPO MC-8 2.4GHz TR set (w/MR-8)
  • KO PROPO MC-8 2.4GHz TR set (w/MR-8)
  • Radio and Receiver
  • Manufacturer
    :
    Kyosho
  • Model
    :
    80710
  • Weight
    :
    600.00 Gram
  • Price
    :
    USD 85.00
  • Qty
    :

No. 80710
Coming Soon

[MC-8 Specifications]
・2.4GHz MX-F Multi controller
・Dimensions: 150.0 x 84.5 x 61.0mm
・Weight: 145.5g (not included battery)
・Battery: Dry battery AAA x4(Separate sales)
・Current:less than 50mA
・Continual use time: 17 hours ( It will be different by each situation.)
・Number of channels: 8
  Stick operation x4 + Switch operation x4
・Frequency: 2.4GHz
・Control distance: each direction 50m
 *It depends on operating conditions and situations of receiving antenna.
・Compatible receiver: MR-8
*Can not use an FHSS receiver like the KR-211FH.

[MR-8 Specifications]
・2.4GHz MX-F multi receiver
・Dimensions:27.0 x 28.0 x 15.0mm
・Weight: 7.0g
・Operation voltage: 3.0 - 7.4V
・Battery types for use: Dry battery, Rechargeable batteries.
    (Ni-MH 3~5s、Li-Fe 1~2s、Li-Po 1s)
 *Do not mix different types of batteries.
 *Please notice voltage down when using Lithium batteries.
・Current : less than 40mA (whilw receiving)
・Number of channels: 8
・Frequency: 2.4GHz
・Compatible transmitter: MC-8

Please see and check too this page for safety using.

 

Made in Japan

  • The Multi Controller MC-8 and compatible receiver MR-8 is recommended for use with RC cars or to control an original machine.

     

    Control up to 8 channels.​

    In radio control models, a channel is used to control a moving part. 2 or 4 channels is generally used in previous RC cars, but the MC-8 is available up to 8 channels (CH A-H).

     

    When using with an RC car.​

    Generally, 2 channels are to be used, one for steering of car and the other is for throttle (acceleration and brake) of the car. The both are controlled by stick operation. Movement amount of each channel is the same value for each stick. So you can control the machine as you visualize.

    Required units for 1/10 touring car or M-Chassis. for example.

        ・Radio controller: MC-8+MR-8
        ・Speed Controller: VFS-FR2
        ・Steering Servo: PDS-2503
        ・Battery Lithium Ferrite battery(Li-Fe 2cell)

    Required units for Star unit, for example.

        ・Radio Controller: MC-8+MR-8
        ・Speed Controller: MD-1 RC Car ESC Type or MD-1 Quick Reverse Type
        ・Steering Servo: PDS-2503
        ・Battery: AAA Alkaline battery
        ・Switch harness BEC(for MR-8)

    You can select operation method by channel setting.

    1)If you assign the steering to CH-B, throttle to CH-C; you can operate like a game controller.
    2)If you assign the steering to CH-D, throttle to CH-A, you can operate like a stick radio for general RC cars.
    1,Setting like a game controller.                         2, Setting like a RC stick transmitter.

     

    You can add several Accessory Function controls.​

    You can use each channel, except the steering and the throttle,freely according to the purpose you want.

    For example, you can add LED lamps in the headlights as a setting like headlights flashing using CH-F or CH-G, add 4WS system as a setting to control steering for each the front and rear tires with CH-B and CH-D, and also attach a crane or winch that can be controlled by a 20 step operation with CH-G and CH-H.

    We also recommend using the MD-1 RC car ESC Type of MD-1 Quick Reverse Type for use of small motors that are 370 types or smaller (diameter 24mm) and to control LED light or buzzer.

     

    You can enjoy changing commercially sold craft kit to a radio control model.​

    For example, if a general wired remote control model adds the MR-8, MD-1, etc, it will be converted to a radio controlled model with ease. This will be controlled with more distance and adding servos, LED, etc, with more controllability. There are many modification possibilities with your imagination, so please enjoy your ideas.

    Required unit for Tamiya CAM-PROGRAM ROBOT (upper photo), for example.

        ・Radio Controller: MC-8+MR-8
        ・Motor Controller MD-1(Neutral brake type)x2
        ・Battery: Lithium Ferrite battery(Li-Fe 2cell)
        ・Switch harness BEC(for MR-8)
             (Image of the battery connector shown above has been changed.)


                  In example usingROBO Power cell F2-850type (Li-fe) and charger


    MC-8 and MR-8 are recommended for use with the models you want to customize.

    We recommend using the MD-1 for use of small motors that are 370 types or smaller (diameter 24mm) and to control LED light or buzzer.

     

    Children can use MC-8 easily with the small size and light weight body.​

    MC-8 is less than 200g even when batteries are installed. Children can use this for a long time without getting tired. The product is designed for use by children and adults in mind for less discomfort. Parents can enjoy the product together with children, too.


     

    Safety even when used by small children.​

    The security design to prevent battery removal by children is adopted.

     

    MC-8 uses AAA batteries, but the design securely fixes the battery cover with a screw. A screwdriver is required for removal of the battery cover from the unit. The screw also has a fall prevention washer so the screw will not be lost.

     

    Also the battery box design will not allow the unit to turn on if the batteries are inserted incorrectly.

    After usage, you can turn off the unit with a long press of the power switch, but if forgotten to be turned off after 5 minutes of non-use (total of 10 minutes after the alarm) it will shut down automatically as a safety design.

     

    Includes compatible receiver MR-8

    MR-8 is compatible with the MC-8 receiver. (Receiver accepts the radio signal from the transmitter and outputs signals to each device.) The format of the signal from the MR-8 is general RC, so you can use it with our servos, ESC and each device in a RTR set.

    (※1)We have confirmed the TAMIYA XB Series, KYOSHO RTR.
               But we can not test all models, so we can not guaranty all models.

    MC-8 has a reverse function that can change the signal directions, so it can change the signal when the signal direction is reversed but the direction of the installed devices. Also the end point can be set to help prevent servos from being broken by over operating the steering. MC-8 has the necessary functions to operate RC cars and customization to satisfy you.

     

    MR-8 can be used with easy operation. Please insert connector to the channel you want to use. 

    For example, if you want to control the steering with CH-B of the MC-8, insert the connector of the steering servo to B of the MC-8. Turn on the MC-8 and then the MR-8 to control the steering with the MC-8.


    (Sample instal) Photo of RC car ESC is an optional item.
    This is using the antenna pipe that is included in the RC car kit.

     

     ※ Company name , products name are Trademark or registered trademark by each company in this article.

    Contents

    Multi controller MC-8 x 1

    Multi receiver MR-8 x 1